TUFLOW Message 3550
Revision as of 15:20, 12 November 2024 by Emilie Nielsen (talk | contribs)
TUFLOW Message
WARNING 3550 - SGS Sample Target Distance <=0 = ignoring.
Alternate Message
NA
Message Type
WARNING
Description
SGS Sample Target Distance <=0 = ignoring. The value set by the .tcf command "SGS Sample Target Distance ==" is less than or equal to zero. Therefore, the value is ignored and the SGS sampling frequency is set by the .tgc command(s) "Read Grid Zpt ==", or set to the default value of 11 per face (if no Read Grid Zpt specified).
Suggestions
Ensure "SGS Sample Target Distance ==" is set to a value greater than 0.
Refer to the TUFLOW Manual for more information on SGS sampling frequency.
| Up |
|---|
 3xxx Messages
|