Tutorial M07 Results QGIS

Introduction

QGIS is used to view the model results. For viewing of the 2D map results, see Module 1.

Method

Inspect the resolution of the outputs:

1. Open the TUFLOW viewer.
2. Select File > Load Results. Navigate to the M07_5m_001.tcf in the Module_07\TUFLOW\runs folder and open it.
3. Turn on the Vector Velocity and Velocity from the Result Type panel. View the finer resolution of vectors within the level 2 grid compared to the level 1 grid:
   
   
   

Conclusion

• The velocity and vector velocity outputs were inspected in relation to the grid resolution.
• For further functionality, see TUFLOW Viewer.

Up
Back to Module 7 Main Page