TUFLOW Message 2126
Revision as of 11:25, 28 May 2025 by Emilie Nielsen (talk | contribs)
TUFLOW Message
ERROR 2126 - Material resistance values can only be specified for Manning's n at present.
Alternate Message
NA
Message Type
ERROR
Description
When using 2d_mat materials layers and a material file to specify the bed resistance values for 2D domains, the .tcf command "Bed Resistance Values == " must be set to "MANNING N". Refer to the TCF Appendix of the TUFLOW Manual for more details.
Suggestions
In the .tcf, set "Bed Resistance Values == MANNING N".
If bed resistance values are set using the .tgc command "Set CnM == ", "Read GIS CnM == ", or "Read Grid CnM == ", ensure the "Read Materials File == " command is commented out/removed in the .tcf.
| Up |
|---|
 2xxx Messages
|