HEC-RAS to TUFLOW
Revision as of 03:47, 5 February 2015 by Chris Huxley (talk | contribs) (→HEC-RAS Geometric Data to TUFLOW Conversion (sdf_to_GIS.exe))
Introduction
This page contains a brief introduction to the methods of converting HEC-RAS model inputs into a format which compatible with TUFLOW.
If you have any suggestions to be included in these pages, please email support@tuflow.com.
HEC-RAS Geometric Data to TUFLOW Conversion (SDF_to_GIS.exe)
This utility converts HEC-RAS geometric data data into TUFLOW compatible GIS and csv input format. The utility outputs include: - 1D centerline GIS information - Cross section GIS locations - Cross-section data in csv format The HEC-RAS model inputs need to be in SDF format, and must be geo-referenced using a real world projection. SDF format is an HEC-RAS export format.