TUFLOW Message 2099
Revision as of 11:16, 15 February 2011 by tuflow>Par
TUFLOW Message
CHECK 2099 - Ignored repeat application of boundary to 2D cell.
Alternate Message
NA
Message Type
CHECK
Description
Ignored repeat application of boundary to 2D cell. This often occurs when a boundary line registers a 2D cell twice. Usually not an issue, but may be an indicator that a boundary line(s) have been digitised incorrectly or were accidentally repeated.
Suggestions
Check reason for repeat application of boundary.
| Up |
|---|
 2xxx Messages
|