TUFLOW Message 2140

TUFLOW Message
ERROR 2140 - Reading following line in control file.

Alternate Message
NA

Message Type
ERROR

Description
An error occurred reading the following line in the control file.

Suggestions
Check the line is a valid TUFLOW command for the version of TUFLOW that you are running. Common mistake are:

• Omitting the double equals (Set IWL = 0.6 not Set IWL == 0.6)
• Using the Read GIS syntax for versions of TUFLOW prior to 2010 (use Read MI instead
• Putting a command in the wrong file, e.g. putting a geometry (.tgc) command in the boundary file (.tbc)

Up
2xxx Messages