TUFLOW Message 2377

From Tuflow
Revision as of 13:00, 6 December 2011 by Bill Syme (talk | contribs)
Jump to navigation Jump to search

TUFLOW Message
ERROR 2377 - Apply Wind Stresses command is redundant as of Build 2009-05-AL. Please refer to manual.

Alternate Message
NA

Message Type
ERROR

Description
This command was made redundant as of Build 2009-05-AL and was replaced by the ability to apply wind stresses over time using “WT” 2D boundary conditions.

Suggestions
Use "WT" boundaries in a 2d_bc layer.


Up
Go-up.png 2xxx Messages
Retrieved from "https://wiki.tuflow.com/w/index.php?title=TUFLOW_Message_2377&oldid=3082"