DOS GPU Usage

From Tuflow

Revision as of 15:48, 10 October 2017 by Chris Huxley (talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to navigation Jump to search

nvidia-smi (also NVSMI) provides monitoring and management capabilities for each of NVIDIA's Tesla, Quadro, GRID and GeForce GPU device from Fermi and higher architecture families. The following steps can be used to access nVidia-smi and monitor GPU usage for TUFLOW simulations:

Launch the DOS Command Prompt from the Run window (press Win+R on your keyboard to open it then, type cmd).

Nvidia-smi 001.png

Change the directory location to the folder where nvidia-smi is located. Type cd C:\Program Files\NVIDIA Corporation\NVSMI into the DOS window and press enter.

Nvidia-smi 002.png

Type nvidia-smi -l 10 in the DOS window and press enter. This will instruct nvidia-smi to refresh every 10 seconds.

Nvidia-smi 003.png

Review the nvidia-smi usage summary.

Retrieved from "https://wiki.tuflow.com/w/index.php?title=DOS_GPU_Usage&oldid=13516"