Codemeter Enable Logging

From Tuflow
Jump to navigation Jump to search

This page is under construction!!!

Introduction

This page contains instructions for enabling "Logging" in Codemeter Control Centre. "Logging" is a very useful functionality to monitor the licence allocation by Codemeter.

Method

  1. Open the CodeMeter Control Centre. This can be done via the icon on the taskbar:
    CodeMeter TaskBar.jpg

    Or via the start menu:
    CodeMeter ProgramFiles.jpg
  2. Go to "File" and check "Logging".
  3. Codemeter Enable Logging 01.png
    This can also be access by pointing an internet browser to: [http://localhost:22350/]
    The following CodeMeter webpage will appear.
    Codemeter v6.40d WebAdmin.JPG
  4. Navigate to the Configuration >> Server >> Server Access tab and enable the Network Server checkbox and hit Apply.
  5. Codemeter v6.40d Network Server.JPG
  6. The network licence should now be available. This can be tested on the server by double clicking on a TUFLOW executable.