TUFLOW Message 3011
Revision as of 12:09, 19 April 2018 by Teegan.Burke (talk | contribs) (Created page with "{{TUFLOW_Message |tuflow_message=ERROR 3011: Target control number must be in range 0.001 - 1.2. <br> |alt_msg=None |type=ERROR |message_desc=The wet/dry depth threshol...")
TUFLOW Message
ERROR 3011: Target control number must be in range 0.001 - 1.2.
Alternate Message
None
Message Type
ERROR
Description
The wet/dry depth threshold has been set to a value below the minimum allowed.
Suggestions
The minimum permissible target timestep allowed for the HPC Solver is set with the 'Timestep Minimum' TCF command, where the default is the minimum of 0.1 seconds or the cell size divided by 200 m/s. This value must be less than the initial timestep value specified for the HPC Solver with the 'Timestep' or 'Timestep Intitial' TCF commands. The timestep can also not be less than 0.000001s.
| Up |
|---|
 3xxx Messages
|