TUFLOW Message 3008

From Tuflow
Revision as of 13:37, 16 July 2018 by ShuangGao (talk | contribs)
Jump to navigation Jump to search

TUFLOW Message
ERROR 3008: nut_m must be >= 0.
ERROR 3008: nut_c must be >= 0

Alternate Message


Message Type
ERROR

Description
When PRANDTL turbulence model is selected, the viscosity is modelled based on the turbulence length scale lm and the turbulence intensity k as follows:

Suggestions
XX.


Up
Go-up.png 3xxx Messages
Retrieved from "https://wiki.tuflow.com/w/index.php?title=TUFLOW_Message_3008&oldid=16113"