TUFLOW Message 0048

From Tuflow
Revision as of 23:56, 17 November 2015 by Rachel (talk | contribs) (Created page with "{{TUFLOW_Message |tuflow_message=ERROR 0048 - No 1D WLLs and no 2D Cells found within Output Zone |alt_msg=NA |type=ERROR |message_desc= There are no active 2D cells or 1D...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

TUFLOW Message
ERROR 0048 - No 1D WLLs and no 2D Cells found within Output Zone

Alternate Message
NA

Message Type
ERROR

Description
There are no active 2D cells or 1D WLLs in code area or output zone.

Suggestions
Ensure Check that the active domain and code is selecting cells. Ensure that the code boundary is set to 1 (ie, that the cells will be active), check that the defined domain and the code area overlap (use the 2d_dom_check and the 2d_code_check), also check that layers are in the same projection.


Up
Go-up.png 0xxx Messages
Retrieved from "https://wiki.tuflow.com/w/index.php?title=TUFLOW_Message_0048&oldid=9047"