PyTuflow

From Tuflow
Revision as of 16:44, 11 February 2019 by Ellis Symons (talk | contribs)
Jump to navigation Jump to search

Class: ResData

Class for TUFLOW time series results.

Initialised as an empty object, or with results with a *.tpc in TUFLOW 2016 release and later or *.info in TUFLOW 2013 release. 

import pytuflow as tu


res = tu.ResData()  # initialising as an empty object
# or
res = tu.ResData('M01_5m_001.tpc')  # initialising with results

Methods

Method Description Returns
channelConnectionCount ( str Node ID ) Returns the number of channels connected to a given node int Count
channelConnections ( str Node ID ) Returns a list of the channels connected to a given node list Channel IDs
channelCount () Returns the total number of channels in results int Count
channelResultTypes () Returns a list of all the available result types for channels list of Result Types
channels () Returns a list of all the channels IDs in the results list Channel IDs
channelsDownstream ( str Node ID ) Returns a list of all the channels downstream of a given node list Channel IDs
channelsUpstream ( str Node ID ) Returns a list of all the channels upstream of a given node list Channel IDs
format () Returns the result format i.e. '2013' or '2016' str Format
getAdverseGradients () Returns locations of any adverse water level or energy level (if result type available) gradients in long profile. Note getLongProfileData method must be called prior to calling this method tuple Adverse Water Level Gradient Locations ( list x data, list y data )
tuple Adverse Energy Level Gradient Locations ( list x data, list y data )
getLongProfileData ( float Timestep, str Result Type, str Channel ID, [optional] str 2nd Channel ID ) Returns long profile data from a given channel to another channel. If no second channel is specified will continue until no further channels downstream bool Error
str Message
tuple Profile Data ( list x values, list y values )
getLongProfileTimeOfMax () Returns the time of maximum water level along the current profile. Note getLongProfileData method must be called prior to calling this method list x values
list y values
getPipes () Returns any pipe or culvert data in the current profile. Note getLongProfileData method must be called prior to calling this method list pipes [ list pipe vertexes [ tuple vertex ( x point, y point ) ] ]
getTimeSeriesData ( str Element, str Result Type, [optional] str domain ) Returns time series data for the given element (1D node, 1D channel, 2D PO, RL) for a the given result type. If there are duplicate names between 1D, PO, or RL elements it will give priority return to 1D elements first, PO elements second, and lastly RL elements unless 'domain' variable is explicitly specified (domain options: '1D', '2D', 'RL') bool Error
str Message
tuple time series data ( list x data, list y data )
load ( str Filepath ) Loads result file. File formats are *.tpc for TUFLOW release 2016 and later, or *.info for TUFLOW release 2013 bool Error
str Message
longProfileResultTypes () list Result Types
maximum ( str Element, str Result Type, [optional] str Domain ) Returns the maximum result value for the given element (1D node, 1D channel, 2D PO, RL) for the given result type. If there are duplicate names between 1D, PO, or RL elements it will give priority return to 1D elements first, PO elements second, and lastly RL elements unless 'domain' variable is explicitly specified (domain options: '1D', '2D', 'RL') bool Error
str Message
float Maximum Value
maximumTimestepChange ( str Element, str Result Type, [optional] str Domain ) Returns the maximum change in result value in one timestep for the given element (RL elements supported only) for the given result type. If there are duplicate names between 1D, PO, or RL elements it will give priority return to 1D elements first, PO elements second, and lastly RL elements unless 'domain' variable is explicitly specified (domain options: '1D', '2D', 'RL') bool Error
str Message
float Maximum Value
name () Returns the name of the result str Name
nodeCount () Returns the total number of nodes in the results int Count
nodeDownstream ( str Channel ID ) Returns the name of the downstream node of a given channel str Node ID
nodeResultTypes () Returns a list of all the available result types for nodes list Result Types
nodes () Returns a list of all the node IDs in the results list Node IDs
nodeUpstream ( str Channel ID ) Returns the name of the upstream node of a given channel str Node ID
poNames () Returns a list of all the available Plot Output names list PO ID
poResultTypes () Returns a list of all the available Plot Output result types list Result Types
rlCount () Returns the total number of Reporting Locations (of all geometry type) in the results int Count
rlLineCount () Returns the total number of line Reporting Locations in the results int Count
rlNames () Returns a list of all the Reporting Location names list RL ID
rlPointCount () Returns the total number of point Reporting Locations in the results int Count
rlRegionCount () Returns the total number of region Reporting Locations in the results int Count
rlResultTypes () Returns a list of all the available Reporting Location result types list Result Types
source () Returns the full file path to the source result file (*.tpc or *.info) str Path
timeOfMaximum ( str Element, str Result Type, [optional] str Domain ) Returns the time of maximum for the given element (1D node, 1D channel, 2D PO, RL) for the given result type. If there are duplicate names between 1D, PO, or RL elements it will give priority return to 1D elements first, PO elements second, and lastly RL elements unless 'domain' variable is explicitly specified (domain options: '1D', '2D', 'RL') bool Error
str Message
float Time (hrs)
timeOfMaximumTimestepChange ( str Element, str Result Type, [optional] str Domain ) Returns the time of maximum for change in result value in one timestep for the given element (RL elements supported only) for the given result type. If there are duplicate names between 1D, PO, or RL elements it will give priority return to 1D elements first, PO elements second, and lastly RL elements unless 'domain' variable is explicitly specified (domain options: '1D', '2D', 'RL') bool Error
str Message
float Time (hrs)

channelConnectionCount

channelConnectionCount ( Node ID )
Returns the number of channels connected to a given node

Parameters
Node ID: str
Name or ID of node e.g. 'Chan_A.1'
Returns
Count: int
Number of connected channels

Example 

import pytuflow as tu

# Initialise result class
res = tu.ResData()

# load .tpc result file
path = r'C:\TUFLOW\results\M04_5m_001.tpc'
err, message = res.load(path)

# check results were loaded successfully before calling function
if not err:
    node = 'Chan_A.1'
    conn_count = res.channelConnectionCount(node)
    # print to console    
    print('{0} channels connected to {1}'.format(conn_count, node))
else:
    # did not load correctly, print error message to console
    print(message)

channelConnections

channelConnections ( Node ID )
Returns a list of the channels connected to a given node

Parameters
Node ID: str
Name or ID of node e.g. 'Chan_A.1'
Returns
Out: list
List of connected channels e.g. ['Chan_A', 'Chan_B']

Example 

import pytuflow as tu

# Initialise result class
res = tu.ResData()

# load .tpc result file
path = r'C:\TUFLOW\results\M04_5m_001.tpc'
err, message = res.load(path)

# check results were loaded successfully before calling function
if not err:
    node = 'Chan_A.1'
    conn_chans = res.channelConnections(node)
    # print to console    
    print('Channels connected to {0}:'.format(node))
    for chan in conn_chans:
        print(chan)
else:
    # did not load correctly, print error message to console
    print(message)

channelCount

channelCount ()
Returns the total number of channels in results

Parameters
-
Returns
Count: int
Number of channels

Example 

import pytuflow as tu

# Initialise result class
res = tu.ResData()

# load .tpc result file
path = r'C:\TUFLOW\results\M04_5m_001.tpc'
err, message = res.load(path)

# check results were loaded successfully before calling function
if not err:
    chan_count = res.channelCount()
    # print to console    
    print('{0} channels in results'.format(chan_count))
else:
    # did not load correctly, print error message to console
    print(message)

channelResultTypes

channelResultTypes ()
Returns a list of all the available result types for channels

Parameters
-
Returns
Out: list
List of result types e.g. ['Q', 'V']

Example 

import pytuflow as tu

# Initialise result class
res = tu.ResData()

# load .tpc result file
path = r'C:\TUFLOW\results\M04_5m_001.tpc'
err, message = res.load(path)

# check results were loaded successfully before calling function
if not err:
    chan_rt = res.channelResultTypes()
    # print to console    
    print('Available channel result types:')
    for rt in chan_rt:
        print(rt)
else:
    # did not load correctly, print error message to console
    print(message)

channels

channels ()
Returns a list of all the channels IDs in the results

Parameters
-
Returns
Out: list
List of channels e.g. ['Chan_A', 'Chan_B', 'Chan_C']

Example 

import pytuflow as tu

# Initialise result class
res = tu.ResData()

# load .tpc result file
path = r'C:\TUFLOW\results\M04_5m_001.tpc'
err, message = res.load(path)

# check results were loaded successfully before calling function
if not err:
    chans = res.channels()
    # print to console    
    print('Channels:')
    for chan in chans:
        print(chan)
else:
    # did not load correctly, print error message to console
    print(message)

channelsDownstream

channelsDownstream ( Node ID )
Returns a list of all the channels downstream of a given node

Parameters
Node ID: str
Name or ID of node e.g. 'Chan_A.1'
Returns
Out: list
List of channels e.g. ['Chan_B']

Example 

import pytuflow as tu

# Initialise result class
res = tu.ResData()

# load .tpc result file
path = r'C:\TUFLOW\results\M04_5m_001.tpc'
err, message = res.load(path)

# check results were loaded successfully before calling function
if not err:
    node = 'Chan_A.1'
    dns_chans = res.channelsDownstream(node)
    # print to console    
    print('Channels downstream of {0}:'.format(node))
    for chan in dns_chans:
        print(chan)
else:
    # did not load correctly, print error message to console
    print(message)

channelsUpstream

channelsUpstream ( Node ID )
Returns a list of all the channels upstream of a given node

Parameters
Node ID: str
Name or ID of node e.g. 'Chan_A.1'
Returns
Out: list
List of channels e.g. ['Chan_A']

Example 

import pytuflow as tu

# Initialise result class
res = tu.ResData()

# load .tpc result file
path = r'C:\TUFLOW\results\M04_5m_001.tpc'
err, message = res.load(path)

# check results were loaded successfully before calling function
if not err:
    node = 'Chan_A.1'
    ups_chans = res.channelsUpstream(node)
    # print to console    
    print('Channels upstream of {0}:'.format(node))
    for chan in ups_chans:
        print(chan)
else:
    # did not load correctly, print error message to console
    print(message)

format

format ()
Returns the result format i.e. '2013' or '2016'

Parameters
-
Returns
Format: str
Format of results e.g. '2016'

Example 

import pytuflow as tu

# Initialise result class
res = tu.ResData()

# load .tpc result file
path = r'C:\TUFLOW\results\M04_5m_001.tpc'
err, message = res.load(path)

# check results were loaded successfully before calling function
if not err:
    format = res.format()
    # print to console    
    print('Results format: {0}'.format(format)
else:
    # did not load correctly, print error message to console
    print(message)

getAdverseGradients

getAdverseGradients ()
Returns locations of any adverse water level or energy level (if result type available) gradients in long profile. Note getLongProfileData method must be called prior to calling this method

Parameters
-
Returns
Adverse water level gradients: tuple
( list x data, list y data ) e.g. ([0, 5], [10, 12])
Adverse energy level gradients: tuple
( list x data, list y data ) e.g. ([0, 5], [11, 14])

Example 

import matplotlib.pyplot as plt  # plotting library
import pytuflow as tu

# Initialise result class
res = tu.ResData()

# load .tpc result file
path = r'C:\TUFLOW\results\M04_5m_001.tpc'
err, message = res.load(path)

# check results were loaded successfully before continuing
if not err:
    # initialise plot
    fig, ax = plt.subplots()

    # get long profiles and add to plot
    chan = 'Chan_A'
    timestep = 1.0
    result_types = ['Bed Level', 'H']  # get both water level and bed level
    for rt in result_types:
        err_lp, mess_lp, data = res.getLongProfileData(timestep, rt, chan)
    
        # check for error before plotting
        if not err_lp:
            x, y = data
            ax.plot(x, y, label=rt)
        else:
            # error occurred getting long profile data, print error message to console
            print(mess_lp)

    # check for adverse gradients
    adv = res.getAdverseGradients()
    for i, data in enumerate(adv):
        x, y = data

        # get appropriate label
        # getAdverseGradients() returns 2 datasets:
        # first dataset adverse water level
        # second dataset adverse energy level
        if i == 0:  # first dataset
            label = 'Adverse Water Levels'
        else:  # second dataset
            label = 'Adverse Energy Levels' 

        # add to plot as points
        ax.plot(x, y, label=label, marker='o', linestyle='None')
    
    # add legend to plot
    lines, labs = ax.get_legend_handles_labels()
    ax.legend(lines, labs)
      
    # show plot   
    fig.show()
else:
    # did not load correctly, print error message to console
    print(message)

getLongProfileData

getLongProfileData ( Timestep, Result Type, Channel ID, [optional] 2nd Channel ID )
Returns long profile data from a given channel to another channel. If no second channel is specified will continue until no further channels downstream

Parameters
Timestep: float or str
Output timestep to plot. Can be a value e.g. 1.5 or string e.g. 'max'
Result Type: str
Result type e.g. 'H'
Channel ID: str
Starting channel for long profile e.g. 'Chan_A'
2nd Channel ID: str
Optional downstream channel ID to stop the long profile at e.g. 'Chan_D'
Returns
Error: bool
Returns False on success, True when an error occurred
Message: str
Accompanying error message if an error occurred
Data: tuple
x data points: list
data point: float
y data points: list
data point: float
e.g. ([0, 1, 2, 3, 4, 5], [10, 20, 30, 20, 10, 0]

Example 

import matplotlib.pyplot as plt  # plotting library
import pytuflow as tu

# Initialise result class
res = tu.ResData()

# load .tpc result file
path = r'C:\TUFLOW\results\M04_5m_001.tpc'
err, message = res.load(path)

# check results were loaded successfully before continuing
if not err:
    # initialise plot
    fig, ax = plt.subplots()

    # get long profiles and add to plot
    chan = 'Chan_A'
    timestep = 1.0
    result_types = ['Bed Level', 'H']  # get both water level and bed level
    for rt in result_types:
        err_lp, mess_lp, data = res.getLongProfileData(timestep, rt, chan)
    
        # check for error before plotting
        if not err_lp:
            x, y = data
            ax.plot(x, y, label=rt)
        else:
            # error occurred getting long profile data, print error message to console
            print(mess_lp)

    # add legend to plot
    lines, labs = ax.get_legend_handles_labels()
    ax.legend(lines, labs)
      
    # show plot   
    fig.show()
else:
    # did not load correctly, print error message to console
    print(message)

getLongProfileTimeOfMax

getLongProfileTimeOfMax ()
Returns the time of maximum water level along the current profile. Note getLongProfileData method must be called prior to calling this method

Parameters
-
Returns
x data: list
x points for plotting time of max along long profile e.g. [0, 1, 2, 3, 4, 5]
y data: list
y points for plotting time of max along long profile e.g. [10, 11, 12, 13, 14, 15]

Example 

import matplotlib.pyplot as plt  # plotting library
import pytuflow as tu

# Initialise result class
res = tu.ResData()

# load .tpc result file
path = r'C:\TUFLOW\results\M04_5m_001.tpc'
err, message = res.load(path)

# check results were loaded successfully before continuing
if not err:
    # initialise plot
    fig, ax = plt.subplots()

    # get long profiles and add to plot
    chan = 'Chan_A'
    timestep = 'max'  # maximum result along profile
    result_types = ['Bed Level', 'H']  # get both water level and bed level
    for rt in result_types:
        err_lp, mess_lp, data = res.getLongProfileData(timestep, rt, chan)
    
        # check for error before plotting
        if not err_lp:
            x, y = data
            ax.plot(x, y, label=rt)
        else:
            # error occurred getting long profile data, print error message to console
            print(mess_lp)

    # also plot time of max water level on secondary axis
    tom_x, tom_y = res.getLongProfileTimeOfMaximum()
    ax2 = ax.twinx()  # initialise secondary axis

    # add to plot on secondary axis
    ax2.plot(tom_x, tom_y, label='Time of Maximum', linestyle='--')
    
    # combine axis legends and add to plot
    lines, labs = ax.get_legend_handles_labels()
    lines2, labs2 = ax2.get_legend_handles_labels()
    comb_lines = lines + lines2
    comb_labs = labs + labs2
    ax.legend(comb_lines, comb_labs)
      
    # show plot   
    fig.show()
else:
    # did not load correctly, print error message to console
    print(message)

getPipes

getPipes ()
Returns any pipe or culvert data in the current profile. Note getLongProfileData method must be called prior to calling this method

Parameters
-
Returns
Pipe list: list
Vertex list: list
Vertex coords: tuple
e.g. [[(0, 0), (0, 1), (1, 1), (1, 0)], [(1, 1), (1, 2), (2, 2), (2, 1)]]

Example 

import matplotlib.pyplot as plt  # plotting library
from matplotlib.patches import Polygon  # will add pipes and culverts as polygon
import pytuflow as tu

# Initialise result class
res = tu.ResData()

# load .tpc result file
path = r'C:\TUFLOW\results\M04_5m_001.tpc'
err, message = res.load(path)

# check results were loaded successfully before continuing
if not err:
    # initialise plot
    fig, ax = plt.subplots()

    # get long profiles and add to plot
    chan = 'Chan_A'
    timestep = 1.0
    result_types = ['Bed Level', 'H']  # get both water level and bed level
    for rt in result_types:
        err_lp, mess_lp, data = res.getLongProfileData(timestep, rt, chan)
    
        # check for error before plotting
        if not err_lp:
            x, y = data
            ax.plot(x, y, label=rt)
        else:
            # error occurred getting long profile data, print error message to console
            print(mess_lp)

    # get pipes and culverts and add to plot
    pipes = res.getPipes()
    for pipe in pipes:  # loop through all pipes
        polygon = Polygon(pipe, facecolor='0.9', edgecolor='0.5', label='Culverts and Pipes')
        ax.add_patch(polygon)
    
    # add legend to plot
    lines, labs = ax.get_legend_handles_labels()

    # filter duplicate legend items 
    # for example if there is more than one pipe or culvert we only want that to appear once in the legend
    unique_lines = []
    unique_labels = []
    for i, label in enumerate(labs):
        if label not in unique_labels:
            unique_labels.append(label)
            unique_lines.append(lines[i])
    ax.legend(unique_lines, unique_labels)
      
    # show plot   
    fig.show()
else:
    # did not load correctly, print error message to console
    print(message)

getTimeSeriesData

getTimeSeriesData ( Element, Result Type, [optional] domain )
Returns time series data for the given element (1D node, 1D channel, 2D PO, RL) for a the given result type. If there are duplicate names between 1D, PO, or RL elements it will give priority return to 1D elements first, PO elements second, and lastly RL elements unless 'domain' variable is explicitly specified (domain options: '1D', '2D', 'RL')

Parameters
Element: str
Channel, Node, PO, or RL element to get time series data for
Result Type: str
Result type e.g. 'H'
Domain: str
Optional input to specify which domain the Element belongs in. If left as default (None) and there are duplicate names between 1D, PO, or RL elements it will give priority return to 1D elements first, PO elements second, and lastly RL elements.
Returns
Error: bool
Returns False on success, True when an error occurred
Message: str
Accompanying error message if an error occurred
Data: tuple
x data points: list
y data points: list
e.g. ([0, 1, 2, 3, 4, 5], [10, 20, 30, 20, 10, 0]

Examples
Plotting results for multiple elements on the same graph 

import matplotlib.pyplot as plt  # plotting library
import pytuflow as tu

# Initialise result class
res = tu.ResData()

# load .tpc result file
path = r'C:\TUFLOW\results\M04_5m_001.tpc'
err, message = res.load(path)

# check results were loaded successfully before continuing
if not err:
    # initialise plot
    fig, ax = plt.subplots()

    # get time series data and add to plot
    elements = ['Chan_A', 'Chan_B', 'Chan_C']
    result_type = 'Q'
    for element in elements:
        err_ts, mess_ts, data = res.getTimeSeriesData(element, result_type)
    
        # check for error before plotting
        if not err_ts:
            x, y = data
            ax.plot(x, y, label=element)
        else:
            # error occurred getting time series data, print error message to console
            print(mess_ts)
    
    # add legend to plot
    lines, labs = ax.get_legend_handles_labels()
    ax.legend(lines, labs)
      
    # show plot   
    fig.show()
else:
    # did not load correctly, print error message to console
    print(message)

Plotting water level and velocity on the same plot using a secondary axis 

import matplotlib.pyplot as plt  # plotting library
import pytuflow as tu

# Initialise result class
res = tu.ResData()

# load .tpc result file
path = r'C:\TUFLOW\results\M04_5m_001.tpc'
err, message = res.load(path)

# check results were loaded successfully before continuing
if not err:
    # initialise plot
    fig, ax = plt.subplots()
    # initialise secondary axis
    ax2 = ax.twinx()

    # get time series data and add to plot
    elements = ['Chan_A', 'Chan_B', 'Chan_C']
    result_types = ['Q', 'V']
    for element in elements:
        for result_type in result_types:
            err_ts, mess_ts, data = res.getTimeSeriesData(element, result_type)
    
            # check for error before plotting
            if not err_ts:
                x, y = data
                label = '{0}: {1}'.format(result_type, element)

                # plot Q on first axis, V on secondary axis
                if result_type == 'Q':
                    # first axis
                    ax.plot(x, y, label=label)
                else:  # must be 'V'
                    # secondary axis
                    ax2.plot(x, y, label=label, linestyle='--')
            else:
                # error occurred getting time series data, print error message to console
                print(mess_ts)
    
    # combine primary and secondary axis items and add to legend
    lines, labs = ax.get_legend_handles_labels()
    lines2, labs2 = ax2.get_legend_handles_labels()
    lines_comb = lines + lines2
    labs_comb = labs + labs2
    ax.legend(lines_comb, labs_comb)
      
    # show plot   
    fig.show()
else:
    # did not load correctly, print error message to console
    print(message)

Saving a separate plot for each element as a *.png 

import os  # library for operating system file and directory manipulation
import matplotlib.pyplot as plt  # plotting library
import pytuflow as tu

# Initialise result class
res = tu.ResData()

# load .tpc result file
path = r'C:\TUFLOW\results\M04_5m_001.tpc'
err, message = res.load(path)

# save directory for figures
save_dir = r'C:TUFLOW\results\figures'

# check results were loaded successfully before continuing
if not err:
    # get time series data and add to plot
    elements = ['Chan_A', 'Chan_B', 'Chan_C']
    result_type = 'Q'
    for element in elements:
        err_ts, mess_ts, data = res.getTimeSeriesData(element, result_type)
    
        # check for error before plotting
        if not err_ts:
            # initialise plot
            fig, ax = plt.subplots()
            x, y = data
            ax.plot(x, y, label=element)
            
            # add legend to plot
            lines, labs = ax.get_legend_handles_labels()
            ax.legend(lines, labs)

            # add axis labels
            ax.set_xlabel('Time (hrs)')
            ax.set_ylabel('Flow (m3/s)')

            # save fig
            save_name = 'Figure_{0}_{1}.png'.format(element, result_type)
            save_path = os.path.join(save_dir, save_name)
            fig.savefig(save_path)

        else:
            # error occurred getting time series data, print error message to console
            print(mess_ts)
else:
    # did not load correctly, print error message to console
    print(message)

load

load ( Filepath )
Loads result file. File formats are *.tpc for TUFLOW release 2016 and later, or *.info for TUFLOW release 2013

Parameters
Filepath: str
Full path to *.tpc or *.info
Returns
Error: bool
Returns False on success, returns True if an error occurred
Message: str
Accompanying error message if an error occurs

Example 

import pytuflow as tu

# Initialise result class
res = tu.ResData()

# load .tpc result file
path = r'C:\TUFLOW\results\M04_5m_001.tpc'
err, message = res.load(path)

# check if an error occurred
if err:
    # print message
    print(message)

longProfileResultTypes

longProfileResultTypes ()
Returns list of available long profile result types

Parameters
-
Returns
out: list
List of available result types for long profile plotting

Example 

import pytuflow as tu

# Initialise result class
res = tu.ResData()

# load .tpc result file
path = r'C:\TUFLOW\results\M04_5m_001.tpc'
err, message = res.load(path)

# check results were loaded successfully before calling function
if not err:
    lp_rt = res.longProfileResultTypes()
    # print to console    
    print('Available long profile result types:')
    for rt in lp_rt:
        print(rt)
else:
    # did not load correctly, print error message to console
    print(message)

maximum

maximum ( Element, Result Type, [optional] Domain )
Returns the maximum result value for the given element (1D node, 1D channel, 2D PO, RL) for the given result type. If there are duplicate names between 1D, PO, or RL elements it will give priority return to 1D elements first, PO elements second, and lastly RL elements unless 'domain' variable is explicitly specified (domain options: '1D', '2D', 'RL')

Parameters
Element: str
Channel, Node, or RL element to get maximum result for. PO results do not currently support getting maximum value.
Result Type: str
Result type e.g. 'H'
Domain: str
Optional input to specify which domain the Element belongs in. If left as default (None) and there are duplicate names between 1D, PO, or RL elements it will give priority return to 1D elements first, PO elements second, and lastly RL elements.
Returns
Error: bool
Returns False on success, True when an error occurred
Message: str
Accompanying error message if an error occurred
Maximum float
Maximum result

Examples
Maximum flow in a channel 

import pytuflow as tu

# Initialise result class
res = tu.ResData()

# load .tpc result file
path = r'C:\TUFLOW\results\M04_5m_001.tpc'
err, message = res.load(path)

# check results were loaded successfully before calling function
if not err:
    channel = 'Chan_A'
    maximum = res.maximum(channel, 'Q')
    # print to console    
    print('Max flow at {0} is {1} m3/s'.format(channel, maximum)
else:
    # did not load correctly, print error message to console
    print(message)

Maximum water level at a node 

import pytuflow as tu

# Initialise result class
res = tu.ResData()

# load .tpc result file
path = r'C:\TUFLOW\results\M04_5m_001.tpc'
err, message = res.load(path)

# check results were loaded successfully before calling function
if not err:
    node = 'Chan_A.1'
    maximum = res.maximum(channel, 'H')
    # print to console    
    print('Max water level at {0} is {1} mRL'.format(node, maximum)
else:
    # did not load correctly, print error message to console
    print(message)

maximumTimestepChange

maximumTimestepChange ( Element, Result Type, [optional] Domain )
Returns the maximum change in result value in one timestep for the given element (RL elements supported only) for the given result type. If there are duplicate names between 1D, PO, or RL elements it will give priority return to 1D elements first, PO elements second, and lastly RL elements unless 'domain' variable is explicitly specified (domain options: '1D', '2D', 'RL')

Parameters
Element: str
RL element to get maximum change in a single timestep for. Currently RL elements are the only supported type.
Result Type: str
Result type e.g. 'H'
Domain: str
Optional input to specify which domain the Element belongs in. If left as default (None) and there are duplicate names between 1D, PO, or RL elements it will give priority return to 1D elements first, PO elements second, and lastly RL elements.
Returns
Error: bool
Returns False on success, True when an error occurred
Message: str
Accompanying error message if an error occurred
Maximum float
Maximum value change in any given timestep

Example

import pytuflow as tu

# Initialise result class
res = tu.ResData()

# load .tpc result file
path = r'C:\TUFLOW\results\M04_5m_001.tpc'
err, message = res.load(path)

# check results were loaded successfully before calling function
if not err:
    loc = 'Reporting Location 1'
    tsMaximum = res.maximumTimestepChange(channel, 'Q')
    # print to console    
    print('Max flow change in any given timestep at {0} is {1} m3/s'.format(loc, tsMaximum)
else:
    # did not load correctly, print error message to console
    print(message)

name

name ()
Returns the name of the result

Parameters
-
Returns
Name: str
Name of results

Example

import pytuflow as tu

# Initialise result class
res = tu.ResData()

# load .tpc result file
path = r'C:\TUFLOW\results\M04_5m_001.tpc'
err, message = res.load(path)

# check results were loaded successfully before calling function
if not err:
    name = res.name()
    # print to console    
    print('Results from {0} loaded successfully.format(name))
else:
    # did not load correctly, print error message to console
    print(message)

nodeCount

nodeCount ()
Returns the total number of nodes in the results

Parameters
-
Returns
Count: int
Number of nodes

Example

import pytuflow as tu

# Initialise result class
res = tu.ResData()

# load .tpc result file
path = r'C:\TUFLOW\results\M04_5m_001.tpc'
err, message = res.load(path)

# check results were loaded successfully before calling function
if not err:
    node_count = res.nodeCount()
    # print to console    
    print('{0} nodes in results.format(node_count))
else:
    # did not load correctly, print error message to console
    print(message)

nodeDownstream

nodeDownstream ( Channel ID )
Returns the name of the downstream node of a given channel

Parameters
Channel ID: str
Name or ID of channel
Returns
Node ID: str
Name or ID of downstream node

Example

import pytuflow as tu

# Initialise result class
res = tu.ResData()

# load .tpc result file
path = r'C:\TUFLOW\results\M04_5m_001.tpc'
err, message = res.load(path)

# check results were loaded successfully before calling function
if not err:
    channel = 'Chan_A'
    dns_node = res.nodeDownstream(channel)
    # print to console    
    print('Downstream node of channel {0} is {1}'.format(channel, dns_node))
else:
    # did not load correctly, print error message to console
    print(message)

nodeResultTypes

nodeResultTypes ()
Returns a list of all the available result types for nodes

Parameters
-
Returns
Out: list
List of available result types for nodes e.g. ['H', 'E']

Example

import pytuflow as tu

# Initialise result class
res = tu.ResData()

# load .tpc result file
path = r'C:\TUFLOW\results\M04_5m_001.tpc'
err, message = res.load(path)

# check results were loaded successfully before calling function
if not err:
    result_types = res.nodeResultTypes()
    # print to console    
    print('Available result types for nodes are:)
    for result_type in result_types:
        print(result_type)
else:
    # did not load correctly, print error message to console
    print(message)

nodes

nodes ()
Returns a list of all the node IDs in the results

Parameters
-
Returns
Out: list
List of all nodes names in results e.g. ['Chan_A.1', 'Chan_A.2', 'Chan_B.2', 'Chan_C.2'...]

Example

import pytuflow as tu

# Initialise result class
res = tu.ResData()

# load .tpc result file
path = r'C:\TUFLOW\results\M04_5m_001.tpc'
err, message = res.load(path)

# check results were loaded successfully before calling function
if not err:
    nodes = res.nodes()
    # print to console    
    print('Nodes:)
    for node in nodes:
        print(node)
else:
    # did not load correctly, print error message to console
    print(message)

nodeUpstream

nodeUpstream ( Channel ID )
Returns the name of the upstream node of a given channel

Parameters
Channel ID: str
Name or ID of channel
Returns
Node ID: str
Name or ID of upstream node

Example

import pytuflow as tu

# Initialise result class
res = tu.ResData()

# load .tpc result file
path = r'C:\TUFLOW\results\M04_5m_001.tpc'
err, message = res.load(path)

# check results were loaded successfully before calling function
if not err:
    channel = 'Chan_A'
    ups_node = res.nodeUpstream(channel)
    # print to console    
    print('Upstream node of channel {0} is {1}'.format(channel, ups_node))
else:
    # did not load correctly, print error message to console
    print(message)

poNames

poNames ()
Returns a list of all the available Plot Output names

Parameters
-
Returns
Out: list
List of all PO names in results e.g. ['Loc_1', 'Loc_2', 'Loc_3']]

Example

import pytuflow as tu

# Initialise result class
res = tu.ResData()

# load .tpc result file
path = r'C:\TUFLOW\results\M04_5m_001.tpc'
err, message = res.load(path)

# check results were loaded successfully before calling function
if not err:
    po_names = res.nodes()
    # print to console    
    print('PO Names:)
    for po_name in po_names:
        print(po_name)
else:
    # did not load correctly, print error message to console
    print(message)
Retrieved from "https://wiki.tuflow.com/w/index.php?title=PyTuflow&oldid=17328"