TUFLOW Message 1182
Revision as of 15:15, 1 February 2011 by tuflow>Par
TUFLOW Message
ERROR 1182 - Failed to find a node connected to end of channel
Alternate Message
NA
Message Type
ERROR
Description
No 1D node was found at the end of 1D channel.
Suggestions
If you are manually creating 1D nodes, ensure that the channel is correctly snapped to the node. For automatically created 1D nodes ensure that the default parameter in TUFLOW which allows for the automatic creation of nodes is not turned off. Automatic node creation can be turned of with Create Nodes == OFF command in the 1D control file (.ecf).
| Up |
|---|
 1xxx Messages
|