TUFLOW Message 1301

From Tuflow
Revision as of 12:55, 28 April 2016 by Par (talk | contribs)
Jump to navigation Jump to search

TUFLOW Message
ERROR 1301 - No ESTRY nodes found.

Alternate Message
NA

Message Type
ERROR

Description
No 1D nodes have been found.

Suggestions
This error message should only occur for a 1D or 1D/2D model. TUFLOW will check for 1D nodes if:

  • An ESTRY control file (.ecf) has been specified; or
  • Any 1D commands have been specified in the .tcf.

For example the following command in the .tcf will trigger a check for 1D nodes: "1D Output Folder == <output location>"
If you are encountering this message for a 2D only model, please remove 1D commands from the control files.

For a model with a 1D component, check that:

  • Automatic 1D node creation is turned on and 1D channels have been specified
  • If manually specifying 1D nodes, make sure these are being read in correctly.


Up
Go-up.png 1xxx Messages
Retrieved from "https://wiki.tuflow.com/w/index.php?title=TUFLOW_Message_1301&oldid=10021"