TUFLOW Message 1200
Revision as of 12:58, 30 October 2019 by Pavlina Monhartova (talk | contribs)
TUFLOW Message
CHECK 1200 - Node at start of connector can only be used for setting up channel inverts and pit channels.
Alternate Message
NA
Message Type
CHECK
Description
Node at start of connector can only be used for setting up channel inverts and pit channels.
Suggestions
Check message confirming that node is not being automatically created upstream of the connector. If node is required to set up channel inverts and pit channels it needs to be added manually.
| Up |
|---|
 1xxx Messages
|