TUFLOW Message 1305
Revision as of 16:53, 23 June 2022 by Melissa.Moghanloo (talk | contribs)
TUFLOW Message
ERROR 1305 - No NA table data specified for 1D nodes.
Alternate Message
NA
Message Type
ERROR
Description
No nodal area (NA) data exists for the nodes listed in messages.mif.
Suggestions
If manually specifying nodal area tables using make sure the data is being read in correctly via the ecf command: Read GIS Table Links == . If using automatically assigned NA data ensure that the UCS attribute of the 1D network (1d_nwk) is set to Yes (“Y” or “y”) or True (“T” or “t”). When set to true, the storage (based on the width of the channel over half the channel length) is assigned to both of the two nodes connected to the channel.
| Up |
|---|
 1xxx Messages
|