TUFLOW Message 1107
Revision as of 16:34, 1 July 2022 by Melissa.Moghanloo (talk | contribs)
TUFLOW Message
ERROR 1107 - Irregular culverts only available for Culvert Flow == Method E .
Alternate Message
NA
Message Type
ERROR
Description
Irregular type culvert (I type channels) are only available with Culvert Flow == Method E. For more information on the Culvert Flow == command, please see Section 4.7.4.3 of the TUFLOW manual. As of 2008-08-AA, the default for Culvert Flow == Method E.
Suggestions
If using irregular culverts, use the default is Culvert Flow == Method E. If you require a previous Culvert Flow method for backwater compatability, irregular culverts cannot be used.
| Up |
|---|
 1xxx Messages
|