Tutorial M08 001 Results QGIS

From Tuflow
Jump to navigation Jump to search

Introduction

QGIS is used to load and view the 10m, 5m and 2.5m scenarios with the TUFLOW Viewer. For viewing of the 2D map results, see Module 1.

Method

Inspect the results from each scenario:

  1. Open the TUFLOW Viewer.
  2. Load the results using the TLF, this option loads both types of results, Map Outputs and Time Series. From File > Load Results, navigate to the Module_08\TUFLOW\runs\log folder and select the M08_10m_001.tlf, M08_5m_001.tlf and M08_2.5m_001.tlf files.
  3. Inspect the resolution of the results at the edges of the floodplain, the resolution is finer for the 2.5m simulation:

    Animation M08 001 Results 01a.gif

  4. Inspect the timeseries of the flow at the plot output:

    Animation M08 001 Results 02b.gif


Conclusion

  • The results of the 10m, 5m and 2.5m scenarios were inspected using the TUFLOW Viewer.
  • For further functionality, see TUFLOW Viewer.


Up
Go-up.png Back to Module 8 Main Page
Retrieved from "https://wiki.tuflow.com/w/index.php?title=Tutorial_M08_001_Results_QGIS&oldid=33148"