XPSWMM Conversion TUFLOW Geometry Control File (TGC)
Revision as of 11:01, 16 February 2024 by Chris Huxley (talk | contribs) (→TUFLOW Geometry Control File (TGC))
TUFLOW Geometry Control File (TGC)
The TUFLOW Geometry Control File (TGC) contains a series of commands that build the 2D geometry model. At its minimum, the TGC contains:
- Information on the size and orientation of the grid;
- Grid cell codes (whether cells are active or inactive);
- Bed / ground elevations; and
- Bed material type or flow resistance value.
The TGC requires no updates; however, it is recommended to review the TGC before running the simulation to ensure all commands are correct.
| Up |
|---|
 TUFLOW Control File (TCF)]]
|
| Up |
|---|
| Back to XPSWMM to TUFLOW Conversion Page
|