XPSWMM Conversion TUFLOW Geometry Control File (TGC)
Revision as of 14:16, 22 February 2024 by Emilie Nielsen (talk | contribs)
TUFLOW Geometry Control File (TGC)
The TUFLOW Geometry Control File (TGC) contains a series of commands that build the 2D geometry model. At its minimum, the TGC contains:
- Information on the size and orientation of the grid;
- Grid cell codes (whether cells are active or inactive);
- Bed / ground elevations; and
- Bed material type or flow resistance value.
The TGC requires no updates; however, it is recommended to review the TGC before running the simulation to ensure all commands are correct.
| Up |
|---|
 Continue to Next Step: "TUFLOW Control File (TCF)"
|
| Up |
|---|
| Back to Main XPSWMM to TUFLOW Conversion Page
|