TUFLOW Message 2816

From Tuflow
Revision as of 21:35, 29 February 2024 by ElizaCollison (talk | contribs)
Jump to navigation Jump to search

TUFLOW Message
ERROR 2816 - Unable to read integer value from "Set Code" line.

Alternate Message
ERROR 2816 - Unable to read code value from "Read GIS Code BC ==" polygon when processing Quadtree mesh.
ERROR 2816 - Unable to read code value from "Read GIS Code ==" polygon when processing Quadtree mesh.
ERROR 2816 - Unable to read IWL value after "Set IWL ==".
ERROR 2816 - Unable to read IWL value.

Message Type
ERROR

Description
TUFLOW is unable to read the input.

Suggestions
Check that the input is correct. For example "Set IWL ==" is expecting an integer value and ERROR 2816 may be produced if you are reading in an input later (e.g. 2d_iwl_R.shp) which instead should be read in using the "Read GIS IWL ==" command. Otherwise, please contact support@tuflow.com.


Up
Go-up.png 2xxx Messages