TUFLOW Message 2098
Revision as of 10:49, 15 February 2011 by tuflow>Par
TUFLOW Message
CHECK 2098 - Could not find a SC connection snapped to SH boundary.
Alternate Message
NA
Message Type
CHECK
Description
Could not find a SC connection snapped to SH boundary. SH (flow versus head) boundary should be linked to another 2D cell or 1D node via SC connection (not CN connection). This boundary is used for modelling pumps or other water extraction. Water in/out of SH boundary will therefore be created/lost.
Suggestions
To avoid mass loss / outflow from model link SH boundary to 2D cell or 1D node with SC connection.
| Up |
|---|
 2xxx Messages
|