Check Files 1d WLLo

This GIS check file contains the locations of the 1D Water Level Line objects. The 1d_WLLp Check File contains information about the water level line point objects.

Attributes of WLLo_check

Attribute Name	Attribute Description
Dist_for_Add_Points	The minimum distance interval along the WLL to generate elevation and material sampling points (WLL Points). These points form the corners of the triangulation.
Upstream_Node	The ID of the upstream node.
Downstream_Node	The ID of the downstream node.
Weight_to_US_Node	The weighting to the upstream node. For locations between nodes, the water level is taken as a linear interpolation between the upstream and downstream water levels. This interpolation is based on the distance to the US and DS nodes. For example a water level line that is exactly halfway between the US and DS nodes with have a weighting of 0.5. If the nodes are 100m apart and the WLL is 10m from the US node and therefore 90m from the DS node will have a weighting to US node of 0.9. (90% of the WL is from the US node and 10% from the DS node).
Upstream_Channel	The channel upstream of the WLL, for a WLL snapped to a node this is the primary upstream channel. For a WLL partway along a channel this is the channel ID the WLL is connected to.
Downstream_Channel	The channel downstream of the WLL, for a WLL snapped to a node this is the primary downstream channel. For a WLL partway along a channel this is the channel ID the WLL is connected to.