TUFLOW Message 2904

TUFLOW Message
WARNING 2904 - Failed to set up Mass Balance Output Interval. Set to "End Time - Start Time". Use the "Mass Balance Output Interval ==" command, or one of the "Map Output Interval" and the "Time Series Output Interval" command.

Alternate Message
NA

Message Type
WARNING

Description
The model has failed to set up a mass balance output interval and will instead use an interval of the end time, minus the start time. If you would like a more frequent interval, see the below suggestion.

Suggestions
Use one of the following commands:

• "Mass Balance Output Interval == "
• "Map Output Interval == "
• "Time Series Output Interval == "

Note, if using the Map Output Interval option, ensure that the value is being initialised. For example, for the following commands, the Map Output Interval command is used however as there is only one output format (TIF) and this is being set to an interval of 0 the mass balance output interval would not be initialised:

Map Output Format == TIF
Map Output Interval == 300
TIF Map Output Interval == 0

Up
2xxx Messages