Check Files 1d to 2d gw

This GIS check file layer contains more information on the location of groundwater 1D/2D boundary links. Please refer to the TUFLOW Manual for more information on the SX connections to groundwater linking method.
Attributes of 1d_to_2d_gw_check

Attribute Name	Attribute Description
GW_Level	The connected groundwater layer.
Z_Min_GW	The minimum elevation along the link.
Z_Bed_1D	The bed level of the 1D.
Primary_Node	The node ID of the primary 1D node.
Secondary_Node	The node ID of the secondary 1D node (if used), set to "N/A" if not used.
Weight_to_P_Node	The weighting to the primary node.
Weight_to_S_Node	The weighting to the secondary node.
Type_2D_Link	The type of boundary link applied to the 2D cell. For the groundwater connection, this should always be "SX"
Type_1D_Link	The type of boundary link applied to the 1D nodes.
Flags	The boundary flags that have been specified (if any).
Domain_Name	The name of the 2D domain the connection applies to. If a single 2D domain is used, this is "Domain_001".
fxob	The oblique boundary x factor.
fyob	The oblique boundary y factor.

Up
TUFLOW Check Files