TUFLOW Message 1207
Revision as of 10:28, 23 September 2014 by Steph.dufour (talk | contribs) (Created page with "{{TUFLOW_Message |tuflow_message=ERROR 1207 - Default manhole type for digitised manholes with blank Type must be C, J or R. |alt_msg=N/A |type=ERROR |message_desc=For man...")
TUFLOW Message
ERROR 1207 - Default manhole type for digitised manholes with blank Type must be C, J or R.
Alternate Message
N/A
Message Type
ERROR
Description
For manually specified manholes, the manhole type using the command Manhole Default Type == has been left blank, or is set to CR or CJR.
Suggestions
Manhole Default Type == must be set to C, J or R. The CR and CJR options cannot be used noting that CJR is the default.
| Up |
|---|
 1xxx Messages
|