TUFLOW Message 2624

TUFLOW Message
CHECK 2624 - "Maximum RF Location" command is no longer used.

Alternate Message
CHECK 2624 - "Maximum Hyetograph Point" command is no longer used.

Message Type
CHECK

Description
Prior to the 2026 release of TUFLOW the rainfall control file (.trfc) commands Maximum RF Location and Maximum Hyetograph Point could be used to control the memory allocated for reading and processing of rainfalls. From the 2026 release onwards this is no longer required as the these are dynamically allocated based on the input files.
These commands are ignored from the 2026 release onwards.

Suggestions
These commands can be removed from the .trfc if the model will not be simulated with versions of TUFLOW prior to 2026.0.

Up
2xxx Messages