Tuflow

TUFLOW Message 2624

Revision as of 11:54, 25 March 2026 by Par (talk | contribs) (Created page with "{{TUFLOW_Message |tuflow_message=CHECK 2624 - "Maximum RF Location" command is no longer used. |alt_msg=CHECK 2624 - "Maximum Hyetograph Point" command is no longer used. |type=CHECK |message_desc=Prior to the 2026 release of TUFLOW the rainfall control file (.trfc) commands <font color="blue"><tt>Maximum RF Location</tt></font> and <font color="blue"><tt>Maximum Hyetograph Point</tt></font> could be used to control the memory allocated for reading and processing of...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

TUFLOW Message
CHECK 2624 - "Maximum RF Location" command is no longer used.

Alternate Message
CHECK 2624 - "Maximum Hyetograph Point" command is no longer used.

Message Type
CHECK

Description
Prior to the 2026 release of TUFLOW the rainfall control file (.trfc) commands Maximum RF Location and Maximum Hyetograph Point could be used to control the memory allocated for reading and processing of rainfalls. From the 2026 release onwards this is no longer required as the these are dynamically allocated based on the input files.
These commands are ignored from the 2026 release onwards.

Suggestions
These commands can be removed from the .trfc if the model will not be simulated with versions of TUFLOW prior to 2026.0.


Up
2xxx Messages
Retrieved from "https://wiki.tuflow.com/w/index.php?title=TUFLOW_Message_2624&oldid=45641"