Deletion log

Jump to navigation Jump to search

Below is a list of the most recent deletions.

Logs
(newest | oldest) View ( | ) (20 | 50 | 100 | 250 | 500)
  • 09:39, 9 January 2023 ElizaCollison talk contribs deleted page Tute M04 MI 2d code (content was: "=Introduction= As with the breaklines, this can be done in two different layers. The 2d_code format can be used, this type of layer was used in module 1 to define the active area. The polygon has only one attribute that is an integer v...")
  • 09:16, 9 January 2023 ElizaCollison talk contribs deleted page Tute Error 2051 (content was: "ERROR 2051 - Connection object unused or not snapped to a 2D HX or 2D SX object. Indicates that one of the "CN" type lines in the a '''2d_bc''' line is not snapped to the..." (and the only contributor was "Par"))
  • 09:14, 9 January 2023 ElizaCollison talk contribs deleted page Tute M04 SMS Simulation Setup (content was: "SMS writes out all necessary files such as .tcf, .ecf, .tgc, .tbc, bc_dbase etc when ''Export TUFLOW files'' command is executed. For proper linkage of the files, a Geometric component and Simulation should be set up correctly. Follow th...")
  • 09:14, 9 January 2023 ElizaCollison talk contribs deleted page Tute M04 SMS 1d bc (content was: "In Module02, the inflow hydrographs were put into the 2D BC and the outflow WSE Vs Flow (HQ) was defined at 2D BC as well. In this model, we will put..." (and the only contributor was "Murari Paudel"))
  • 09:13, 9 January 2023 ElizaCollison talk contribs deleted page Tute M04 QGIS 1d bc (content was: "=Introduction= In this section we will create the 1D boundary conditions layer using a TUFLOW 1d_bc file. It is in this layer that we w..." (and the only contributor was "David Sturgeon-Smith"))
  • 09:12, 9 January 2023 ElizaCollison talk contribs deleted page Tute M04 Arc 1d bc (content was: "=Introduction= In this section we will create the 1D boundary conditions layer using a TUFLOW 1d_bc file. It is in this layer that we will specify the 1D boundary conditions. =Method= <ol> <li>Create a copy of the '''1d_bc_empty_P.shp'...")
  • 09:12, 9 January 2023 ElizaCollison talk contribs deleted page Tute M04 MI 1d bc (content was: "=Introduction= In this section we will create the 1D boundary conditions layer using a TUFLOW 1d_bc file. It is in this layer that we will specify the 1D boundary conditions. =Method= <ol> <li>Import the '''1d_bc_empty.mif''' template...")
  • 09:11, 9 January 2023 ElizaCollison talk contribs deleted page Tute M04 SMS 2d code (content was: "In Module02, we ran the entire domain of this model in 2D because of which the entire area inside the boundary polygon was marked as ''Active''. But,..." (and the only contributor was "Murari Paudel"))
  • 09:10, 9 January 2023 ElizaCollison talk contribs deleted page Tute M04 QGIS 2d code (content was: "=Introduction= As with the breaklines, this can be done in two different layers. The 2d_bc format can be also be used for this, however, as the regions and lines must be in separate layers, for simplicity, we will use the 2d_code format...")
  • 09:09, 9 January 2023 ElizaCollison talk contribs deleted page Tute M04 Arc 2d code (content was: "=Introduction= As with the breaklines, this can be done in two different layers. The 2d_bc format can be also be used for this, however, as the regions and lines must be in separate layers, for simplicity, we will use the 2d_code format...")
  • 16:02, 6 January 2023 ElizaCollison talk contribs deleted page Tute M04 QGIS 1D2D Breaklines (content was: "=Introduction= In this section we will define within the model the elevation of the 2D cells activated by the HX lines we created in the previous step. The elevation of the HX activated cells control the flux between the 1D and 2D domain...")
  • 15:58, 6 January 2023 ElizaCollison talk contribs deleted page Tute M04 Arc 1D2D Breaklines (content was: "=Introduction= In this section we will define within the model the elevation of the 2D cells activated by the HX lines we created in the previous step. The elevation of the HX activated cells control the flux between the 1D and 2D domain...")
  • 15:56, 6 January 2023 ElizaCollison talk contribs deleted page Tute M04 MI 1D2D Breaklines (content was: "=Introduction= In this section we will define within the model the elevation of the 2D cells activated by the HX lines we created in the previous step. The elevation of the HX activated cells control the flux between the 1D and 2D domain...")
  • 15:55, 6 January 2023 ElizaCollison talk contribs deleted page Tute M04 SMS 2d bc hx (content was: "In this section we will create the 1D/2D links for the open channel. As described on the previous page, this consists of a 1D/2D link with type "HX" a..." (and the only contributor was "Murari Paudel"))
  • 15:55, 6 January 2023 ElizaCollison talk contribs deleted page Tute M04 QGIS 2d bc hx (content was: "=Introduction= In this section we will create the 1D/2D links for the open channel. As described in the previous page, this consists of a 1D/2D link in the 2d_bc with type "HX" and a series of connection lines which connect the 1D compu...")
  • 15:54, 6 January 2023 ElizaCollison talk contribs deleted page Tute M04 Arc 2d bc hx (content was: "=Introduction= In this section we will create the 1D/2D links for the open channel. As described in the previous page, this consists of a 1D/2D link in the 2d_bc with type "HX" and a series of connection lines which connect the 1D compu...")
  • 15:54, 6 January 2023 ElizaCollison talk contribs deleted page Tute M04 MI 2d bc hx (content was: "=Introduction= In this section we will create the 1D/2D links for the open channel. As described on the previous page, this consists of a 1D/2D link with type "HX" and a series of connection lines that connect the 1D computation points...")
  • 15:53, 6 January 2023 ElizaCollison talk contribs deleted page Tute M04 SMS 1d nwk (content was: "In this section, we will create 1D channels. A 1D channel basically represents the channel thalweg and has to intersect the cross section arcs we crea..." (and the only contributor was "Murari Paudel"))
  • 15:52, 6 January 2023 ElizaCollison talk contribs deleted page Tute M04 QGIS 1d nwk (content was: "=Introduction= In this section we create the 1D channels. For this tutorial a number of completed channels are provided as a guide. If this was not provided, the method would be open the "1d_nwk_empty_P.shp" file from the TUFLOW\model\g...")
  • 15:51, 6 January 2023 ElizaCollison talk contribs deleted page Tute M04 Arc 1d nwk (content was: "=Introduction= In this section we create the 1D channels. For this tutorial a number of completed channels are provided as a guide. If this was not provided, the method would be to copy the "1d_nwk_empty_L.shp" file from the TUFLOW\mode...")
  • 15:50, 6 January 2023 ElizaCollison talk contribs deleted page Tute M04 MI 1d nwk (content was: " =Introduction= In this section we create the 1D channels. For this tutorial a number of completed channels are provided as a guide. If this was not provided, the method would be to import the "1d_nwk_empty.mif" file from the TUFLOW\mod...")
  • 15:47, 6 January 2023 ElizaCollison talk contribs deleted page Tute M04 miTools View 1d xs (content was: "=miTools Graph Selected Cross-Section= This miTools utility graphs a csv format section in '''1d_xs''' format within the MapInfo package. To use, simply: # Select the cro..." (and the only contributor was "Par"))
  • 15:46, 6 January 2023 ElizaCollison talk contribs deleted page Tute M04 Hotlink QGIS (content was: " =Introduction= The following steps can be used to open the cross-section files provided as part of the tutorial model in excel, allowing the user to easily visualise the section. The same process can be used to open geo-tagged images.<...")
  • 15:44, 6 January 2023 ElizaCollison talk contribs deleted page Tute M04 Hotlink Arc (content was: "=Introduction= This section introduce how to use ArcMap to open the cross-section files, allowing the user to easily visualise the section. The same process can be used to open geo-tagged images.<br> =Method= To setup hot-linking in Arc...")
  • 15:34, 6 January 2023 ElizaCollison talk contribs deleted page Tute M04 Hotlink MI (content was: "=Introduction= The following steps can be used to open the cross-section files provided as part of the tutorial model in excel, allowing the user to easily visualise the section. The same process can be used to open geo-tagged images.<b...")
  • 15:33, 6 January 2023 ElizaCollison talk contribs deleted page Tute M04 ExtractXS SMS (content was: "As discussed in the main page, this workshop will be based on Module02 model which has a 5m grid and three 1D culverts. We will load this model and make necessary changes to add a 1D channel network that interacts with the surrounding 2D...")
  • 15:08, 6 January 2023 ElizaCollison talk contribs deleted page TUFLOW Licensing Draft (content was: "=Introduction= A TUFLOW licence is required to run TUFLOW except when using third party software such as a GIS to prepare input data or view results, or when running TUFLOW demo, tutorial or example models or in free mode.<br> <br> =Loc...")
  • 15:06, 6 January 2023 ElizaCollison talk contribs deleted page Tute M03 SMS Simulation (content was: "=== Geometry Components === Grids are shared through geometry components as explained in the TUFLOW 2D tutorial. There should be existing ''Geometry Components'' used in previous modules. We will create a copy for this module. <ol> <li>R...")
  • 15:04, 6 January 2023 ElizaCollison talk contribs deleted page Model Changes Not Seen (content was: "=Description= When reviewing the check files, the check file does not exist, or the changes described in the tutorial model aren't in the check files. =Suggestions= There..." (and the only contributor was "Par"))
  • 15:03, 6 January 2023 ElizaCollison talk contribs deleted page Tute M03 SMS 2d zsh (content was: "<ol> =Introduction= In this page, we import data from text files into SMS. Once the data is in SMS, we will set it up in the TUFLOW 2d Z Shape (2d_zsh) format ready for input into TUFLOW. <br> We will use the model that was created in Mo...")
  • 15:03, 6 January 2023 ElizaCollison talk contribs deleted page Tute M03 QGIS 2d zsh (content was: "<ol> =Introduction= In this page, we import data from text file format into a QGIS file. Once the data is in QGIS format we will manipulate into a TUFLOW 2d Z Shape (2d_zsh) format ready for input into TUFLOW. =Method= Two separate sets...")
  • 15:01, 6 January 2023 ElizaCollison talk contribs deleted page Tute M03 Arc 2d zsh (content was: "<ol> =Introduction= In this page, we import data from text file format into an ArcMap file. Once the data is in ArcMap format we will manipulate into a TUFLOW 2d Z Shape (2d_zsh) format ready for input into TUFLOW. =Method= Two separate...")
  • 15:01, 6 January 2023 ElizaCollison talk contribs deleted page Tute M03 MI 2d zsh (content was: "<ol> =Introduction= In this page, we import data from text file format into a MapInfo file. Once the data is in MapInfo format we will manipulate into a TUFLOW 2d Z Shape (2d_zsh) format ready for input into TUFLOW. =Method= Two separate...")
  • 14:53, 6 January 2023 ElizaCollison talk contribs deleted page Only TUFLOW DOS Window (content was: "=Description= When running TUFLOW from Notepad++, only TUFLOW DOS Window open, though the TCF isn’t read and the simulation doesn’t execute.<br> File:On..." (and the only contributor was "ShuangGao"))
  • 14:52, 6 January 2023 ElizaCollison talk contribs deleted page Unsnapped SX Error (content was: "==Error Message== When building the model I get that error one or both of these errors: * Error 2024 - Could not find a 1D node snapped to CN line; or * Error 2028 - Coul..." (and the only contributor was "Par"))
  • 14:51, 6 January 2023 ElizaCollison talk contribs deleted page Save Date Error (content was: "==Error Message== When building the model I get that error that the save date of a .tab file is later than that of the .mid or .mif file. For example:<br> ERROR - Save date of ...2d_zpt_M01_5m_003.tab is later than that of 2d_zpt_m01_5m...")
  • 14:29, 6 January 2023 ElizaCollison talk contribs deleted page Tute M02 SMS Simulation (content was: "== TUFLOW Simulation == frame|right|Final View of Project Explorer A TUFLOW simulation is comprised of a grid, feature coverages, and model parameters. SMS allows for the creation of multiple simulations, each of whic...")
  • 14:25, 6 January 2023 ElizaCollison talk contribs deleted page M02 SMS 1D Results (content was: "<ol> =Introduction= TUFLOW has several kinds of output. All the output data is found in a folder named results under the TUFLOW folder. Each file begins with the name of the simulation which generated the files. The files which have “_...")
  • 14:25, 6 January 2023 ElizaCollison talk contribs deleted page M02 QGIS 1D Results (content was: "<ol> =Introduction= In this page we will review the GIS outputs for the 1D model. We will look at the maximums (flow, level and velocity) as well as the time-series. These are described separately in the sections below. =Maximums= <ol> <...")
  • 14:24, 6 January 2023 ElizaCollison talk contribs deleted page M02 Arc 1D Results (content was: "<ol> =Introduction= In this page we will review the GIS outputs for the 1D model. We will look at the maximums (flow, level and velocity) as well as the time-series. These are described separately in the sections below. =Maximums= <ol> <...")
  • 14:23, 6 January 2023 ElizaCollison talk contribs deleted page M02 MI 1D Results (content was: "<ol> =Introduction= In this page we will review the GIS outputs for the 1D model. We will look at the maximums (flow, level and velocity) as well as the time-series. These are described separately in the sections below. =Maximums= <ol> <...")
  • 14:22, 6 January 2023 ElizaCollison talk contribs deleted page M02 SMS Check Files (content was: "<ol> =Introduction= In this page we will review the 1d network check file and the 1d/2d check files in SMS. The check files are very useful for confirming the inputs to TUFLOW have been correctly inputted. =1D Network Check File= The 1d...")
  • 14:22, 6 January 2023 ElizaCollison talk contribs deleted page M02 QGIS Check Files (content was: "<ol> =Introduction= In this page we will review the 1d network check file and the 1d/2d check files in QGIS. The check files are very useful for confirming the inputs to TUFLOW have been correctly inputted. =1D Network Check File= The 1d...")
  • 14:21, 6 January 2023 ElizaCollison talk contribs deleted page M02 Arc Check Files (content was: "<ol> =Introduction= In this page we will review the 1d network check file and the 1d/2d check files in ArcMap. The check files are very useful for confirming the inputs to TUFLOW have been correctly inputted. =1D Network Check File= The...")
  • 14:21, 6 January 2023 ElizaCollison talk contribs deleted page M02 MI Check Files (content was: "<ol> =Introduction= In this page we will review the 1d network check file and the 1d/2d check files in MapInfo. The check files are very useful for confirming the inputs to TUFLOW have been correctly inputted. =1D Network Check File= The...")
  • 14:20, 6 January 2023 ElizaCollison talk contribs deleted page M02 SMS Error 2050 (content was: "Problems are reported as either an ERROR, WARNING or CHECK. An ERROR stops the simulation and requires the user to fix the problem. WARNINGs and CHECKs do not stop the simulation, but should be checked in case of data inconsistency, part...")
  • 14:20, 6 January 2023 ElizaCollison talk contribs deleted page M02 QGIS Error 2050 (content was: "<ol> =Introduction= In this page we will use the messages layer generated by TUFLOW to locate the cause of an error. =Method= <ol><li>To locate the error load the '''M02_5m_001_messages_P.shp''' file from the '''TUFLOW\runs\log\''' folde...")
  • 14:19, 6 January 2023 ElizaCollison talk contribs deleted page M02 Arc Error 2050 (content was: "<ol> =Introduction= In this page we will use the messages layer generated by TUFLOW to locate the cause of an error. =Method= <ol><li>To locate the error load the '''M02_5m_001_messages_P.shp''' file from the '''TUFLOW\runs\log\''' folde...")
  • 14:18, 6 January 2023 ElizaCollison talk contribs deleted page M02 MI Error 2050 (content was: "<ol> =Introduction= In this page we will use the messages layer generated by TUFLOW to locate the cause of an error. =Method= <ol><li>To locate the error import the '''M02_5m_001_messages.mif''' file from the '''TUFLOW\runs\log\''' folde...")
  • 14:18, 6 January 2023 ElizaCollison talk contribs deleted page Tute M02 SMS 1d2d Link (content was: "=Introduction= This page describes the process of using SMS to create links between the 1D culverts and the 2D model. Three methods are described, this is done to demonstrate the available methods. Generally '''one''' of the described me...")
(newest | oldest) View ( | ) (20 | 50 | 100 | 250 | 500)
Retrieved from "https://wiki.tuflow.com/Special:Log/delete"