TUFLOW Message 1381
Revision as of 10:11, 4 February 2011 by tuflow>Par
TUFLOW Message
WARNING 1381 - Manhole Default Exit Coefficient is greater than 1.
Alternate Message
NA
Message Type
WARNING
Description
The default manhole coefficient used for the Engelhund approach is greater than 1. For C manholes the Manhole Default C Exit Coefficient == is applied, and for R manholes Manhole Default R Exit Coefficient == is used. The defaults for C and R exit coefficients are 0.25 and 0.5 respectively.
Suggestions
Default is outside normal ranges, review data and modify is appropriate.
| Up |
|---|
 1xxx Messages
|