TUFLOW Message 0116
TUFLOW Message
ERROR 0116 - First pair of values for pit inlet depth-flow curve for Inlet Type ",a," are not 0,0.
Alternate Message
NA
Message Type
ERROR
Description
First data pair for pit inlet curve (depth-flow) are not 0,0. The first values must be 0 (at depth 0) and 0 (flow is zero). Anything else is invalid, for example (0,0.1) would mean that at depth of zero a flow of 0.1 m3/s is generated, and mass is created!
Suggestions
Ensure first values in inlet curve are 0,0
| Up |
|---|
 0xxx Messages
|