Batch File Not Running
Revision as of 15:31, 1 February 2018 by Chris Huxley (talk | contribs)
Description
When running TUFLOW with a batch file and setting the TUFLOW executable path or other commands as variable, the command prompt produces an error message and no simulations are executed (as shown below).
Suggestions
Check the path to the TUFLOW executable have been entered correctly. If it has, the error is most likely caused by using a " "(space) before and/or after the "=" in the batch file after the set variable command
For example (incorrect format):
set TUFLOWEXE = C:\TUFLOW\Releases\2017-09-AC\w64\TUFLOW_iSP_w64.exe |
To solve this issue, please remove the " "(space) next to the "=".
For example (correct format):
set TUFLOWEXE=C:\TUFLOW\Releases\2017-09-AC\w64\TUFLOW_iSP_w64.exe |