WIBU Configure Network Client 2016

Introduction

This page contains instructions for configuring a client computer to access a network TUFLOW licence. This requires that you have:

• CodeMeter Runtime kit installed on the client machine, see installing CodeMeter Runtime Kit 2016.
  
• Configured the network server, see configure network server 2016.

Method

1. Open the CodeMeter Control Centre. This can be done via the icon on the taskbar:
   
   
   Or via the start menu:
   
2. Open the WebAdmin via the button in the lower right.

This can also be access by pointing an internet browser to: [http://localhost:22350/]
The following CodeMeter webpage will appear.

3. Navigate to the Configuration >> Basic >> Sever Search List tab and enter the server name or IP address in the Server Search list. Click Add to include the server IP to the list.

800px
Click Apply to make the changes.
4. The client machine should now be configured to access the network TUFLOW dongle. This can be checked by double clicking on a TUFLOW executable on the client machine.