TUFLOW Message 3010
Revision as of 12:08, 19 April 2018 by Teegan.Burke (talk | contribs) (Created page with "{{TUFLOW_Message |tuflow_message=ERROR 3010: minimum permissible dt must be <= initial timestep. <br> |alt_msg=ERROR 3010: Timestep must be >= 'a'<br>ERROR 3010: Timestep mus...")
TUFLOW Message
ERROR 3010: minimum permissible dt must be <= initial timestep.
Alternate Message
ERROR 3010: Timestep must be >= 'a'
ERROR 3010: Timestep must be >= 0.000001 s"
Message Type
ERROR
Description
The wet/dry depth threshold has been set to a value below the minimum allowed.
Suggestions
The minimum permissible target timestep allowed for the HPC Solver is set with the 'Timestep Minimum' TCF command, where the default is the minimum of 0.1 seconds or the cell size divided by 200 m/s. This value must be less than the initial timestep value specified for the HPC Solver with the 'Timestep' or 'Timestep Intitial' TCF commands. The timestep can also not be less than 0.000001s.
| Up |
|---|
 3xxx Messages
|