TUFLOW Message 2787
Revision as of 15:16, 18 June 2019 by Pavlina Monhartova (talk | contribs) (Created page with "{{TUFLOW_Message |tuflow_message=WARNING 2787 - SA boundary applied as SA ALL due to use of "Defaults" command. |alt_msg=NA |type=WARNING |message_desc=This warning occur...")
TUFLOW Message
WARNING 2787 - SA boundary applied as SA ALL due to use of "Defaults" command.
Alternate Message
NA
Message Type
WARNING
Description
This warning occurs for TUFLOW HPC simulations when SA boundaries are applied with Defaults set prior to 2017.
Suggestions
was TUFLOW HPC was only released in 2017. Setting Defaults prior to 2017 should not be used.
| Up |
|---|
 2xxx Messages
|