TUFLOW Viewer - Customising The Plot Legend

Tool Description

The plot legend can be re-positioned and re-orientated by the user, or turned off completely. Each plot (i.e. Time Series, Cross-Section / Long Profile, etc) has unique legend settings.

The legend can be toggled on/off by clicking the Legend button. The positioning and orientation options can be accessed by using the down-arrow on the right-hand side of the button.

Customising The Legend Position

The legend position can be changed by either choosing one of the pre-defined positions, or by inputing a custom position.

The default positions are shown below. The Auto option is not shown as it is dynamic and attempts to choose the best position.

The Custom Position option allows the user to manually specify the exact location of the legend. The convention is as follows:

Position X: 0.0, Y: 0.0 = the bottom left corner of the plot window
Position X: 1.0, Y: 1.0 = the top right corner of the plot window
The position is where the bottom-left of the legend is placed (i.e. the anchor point of the legend is the bottom-left)
The position can be below zero and greater than one (this will place the legend outside the plot)

Examples: Position X:0, Y:0

Position X:1, Y:1

Position X:0.5, Y:1.1