TUFLOW Message 3027
Revision as of 15:19, 13 July 2022 by Melissa.Moghanloo (talk | contribs)
TUFLOW Message
ERROR 3027: Roughness height specified but nLim less than 0.
Alternate Message
None
Message Type
ERROR
Description
The limiting Manning’s n value, required for specifying bed resistance with the theoretically derived log law for shallow flows, must be greater than or equal to 0.0.
Suggestions
A limiting Manning’s n value (based on the n value that would normally be applied) is specified to transition to conventional n values at greater depths.
| Up |
|---|
 3xxx Messages
|