TUFLOW Message 2104

From Tuflow
Revision as of 12:33, 23 December 2022 by Melissa.Moghanloo (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

TUFLOW Message
ERROR 2104 - CoordSys line could not be found in "MI Projection" .mif file.

Alternate Message
ERROR 2104 - "Mi Projection" command does not support Shapefile projection (.prj) file as input.

Message Type
ERROR

Description
CoordSys line could not be found in .mif file defined with the .tcf command MI Projection.

Suggestions
Use "Mi Projection" command with .mif file or switch to "SHP Projection" command.
Check integrity of .mif file, the .mif file should open in a text editor and the first four (4) look something like:
Version 300
Charset "WindowsLatin1"
Delimiter ","
CoordSys Earth Projection 8, 79, "m", -2, 49, 0.9996012717, 400000, -100000 Bounds (-7845061.1011, -15524202.1641) (8645061.1011, 4470074.53373)

The numbers after the CoordSys Earth Projection will change depending on the projection used in the model.


Up
Go-up.png 2xxx Messages
Retrieved from "https://wiki.tuflow.com/w/index.php?title=TUFLOW_Message_2104&oldid=31165"