TUFLOW Message 2476
Revision as of 09:54, 20 October 2023 by Abigail.lillo (talk | contribs)
TUFLOW Message
ERROR 2476 - PO line geometries do not support "<>" outputs.
Alternate Message
ERROR 2476 - PO point geometries do not support "<>" outputs.
ERROR 2476 - PO region geometries do not support "<>" outputs.
WARNING 2476 - PO line geometries do not support "<>" outputs.
WARNING 2476 - PO point geometries do not support "<>" outputs.
WARNING 2476 - PO region geometries do not support "<>" outputs.
WARNING 2476 - HPC / Quadtree does not support "<>" output
Description
PO line / point / region geometries do not support "<>" outputs.
Suggestions
Refer to Table 9-3 in the Manual for valid PO Data Types for line, point and region geometries.
| Up |
|---|
 2xxx Messages
|