TUFLOW SWMM Tutorial M02 Results QGIS

From Tuflow
Revision as of 15:16, 18 December 2023 by Chris Huxley (talk | contribs) (Created page with "==QGIS Result Viewing== <ol> <li>Open TUFLOW Viewer from the TUFLOW Plugin toolbar.<br> <br> File:tuflow_plugin_tuflow_viewer.png<br> <br> <li>Open the simulation results....")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

QGIS Result Viewing

  1. Open TUFLOW Viewer from the TUFLOW Plugin toolbar.

    Tuflow plugin tuflow viewer.png

  2. Open the simulation results. There are two options available:
    • Open 1D and 2D results: Select File > 'Load Results'. Navigate to the TUFLOW\runs folder and select TS02_5m_001.tcf.
    • Open 1D (no 2D results): Select File > 'Load Results - Time Series'. Navigate to the TUFLOW\results folder and select TS02_5m_001_swmm_ts.gpkg.
  3. The video example below opens the 1D and 2D results, using the first of the above options. When asked "Do you want to open result GIS layer?", select Yes. Five new files will load to the Layers Panel:
    • TS02_5m_001_swmm_ts_P: 1D SWMM Node and outlet water level results
    • TS02_5m_001_swmm_ts_L: 1D SWMM conduit flow results
    • TS02_5m_001_PLOT_P: 1D ESTRY and 2D plot output water level and velocity results (Note: There are no ESTRY results from this simulation)
    • TS02_5m_001_PLOT_L: 1D ESTRY and 2D plot output flow results (Note: There are no ESTRY results from this simulation)
    • TS02_5m_001: 2D TUFLOW Results


  4. In the QGIS Layers Panel, select (left click) TS02_5m_001 to establish it as the active dataset. Click on a scalar dataset 'Depth' under the Result Type in the TUFLOW Viewer 'Map Outputs' list. Move the time slider to observe how the results vary at different times during the simulation.
    Note: The styling of the Map Outputs can be changed by right clicking on each result dataset and editing the 'Properties'.


  5. In the TUFLOW Viewer Panel, set the time to '00:05:00.00'.
  6. In the QGIS Layers Panel, right click TS02_5m_001_swmm_ts_L and select 'Zoom to Layer(s)'.
  7. Right click TS02_5m_001_swmm_ts_L again, and select 'Show Labels'.
  8. Use the 'Select Features' tool to highlight all items included in TS02_5m_001_swmm_ts_L.
  9. Click on the 'Flow' dataset under the Result Type in the TUFLOW Viewer 'Time Series' list.
  10. Tick on 'Show Current Time'.




Plot Long-section

Up
Go-up.png Back to TUFLOW SWMM Tutorial 2
Retrieved from "https://wiki.tuflow.com/w/index.php?title=TUFLOW_SWMM_Tutorial_M02_Results_QGIS&oldid=36151"