TUFLOW Message 2904

From Tuflow
Revision as of 23:06, 30 July 2024 by ElizaCollison (talk | contribs)
Jump to navigation Jump to search

TUFLOW Message
WARNING 2904 - Failed to set up Mass Balance Output Interval. Set to "End Time - Start Time". Use the "Mass Balance Output Interval ==" command, or one of the "Map Output Interval" and the "Time Series Output Interval" command.

Alternate Message
NA

Message Type
WARNING

Description
The model has failed to set up a mass balance output interval and will instead use an interval of the end time, minus the start time. If you would like a more frequent interval, see the below suggestion.

Suggestions
Use one of the following commands:

  • "Mass Balance Output Interval =="
  • "Map Output Interval == "
  • "Time Series Output Interval =="




Up
Go-up.png 2xxx Messages