TUFLOW Message 2815

From Tuflow
Revision as of 02:54, 31 July 2024 by ElizaCollison (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

TUFLOW Message
ERROR 2815 - This version of TUFLOW does not support output zones with Quadtree solver.

Alternate Message
ERROR 2815 - Restart files not currently supported for Quadtree.
ERROR 2815 - "Set IWL == AUTO" not currently supported on Quadtree.
ERROR 2815 - Boundary type SC in 2d_bc is not supported for Quadtree GIS Object = Polyline
ERROR 2815 - Boundary type SH in 2d_bc is not supported for Quadtree GIS Object = Point
ERROR 2815 - Boundary type ST in 2d_bc is not supported for Quadtree GIS Object = Point
ERROR 2815 - Boundary type ST in 2d_bc is not supported for Quadtree GIS Object = Polyline
ERROR 2815 - Boundary type WT in 2d_bc is not supported for Quadtree GIS Object = Point
ERROR 2815 - Quadtree solver does not yet support Advection-Disperion module.
WARNING 2815 - Write PO Online not yet supported in Quadtree.

Message Type
ERROR
WARNING

Description
Above features such as output zones are not yet supported in Quadtree.

Suggestions
Remove those features for now or use HPC without Quadtree. For more information or suggestion, please contact support@tuflow.com


Up
Go-up.png 2xxx Messages
Retrieved from "https://wiki.tuflow.com/w/index.php?title=TUFLOW_Message_2815&oldid=40142"