Check Files 2d bg uvpt check
Revision as of 09:06, 6 August 2024 by Emilie Nielsen (talk | contribs)
Contains information on the cell sides (U and V points) that have a 2D bridge shape object applied. This contains information on the elevations, blockages and form loss values applied at each layer of the bridge.
Attributes of bg_uvpt
| Attribute Name | Attribute Description |
|---|---|
| Z_Bed | The ground level of the z point. |
| Deck Soffit | The elevation of the deck soffit (m or ft). |
| Pier_pBlockage | The percentage blockage of the pier layer. For example, '5' for a blockage of 5%. |
| Pier_FLC | Pier layer form loss coefficient. |
| Deck_Obvert | The elevation of the deck obvert. |
| Deck_pBlockage | The percentage blockage of the deck layer. |
| SuperS_FLC | The combined form loss coefficient for the deck and the rail layers. |
| Rail_Obvert | The elevation of the rail obvert. |
| Rail_pBlockge | The percentage blockage of the rail layer. |
| fIP | Inflection point (IP) factor. |
| Method |
| Up |
|---|
 TUFLOW Check Files
|