XPSWMM Conversion TUFLOW SWMM Control File (TSCF) Archive

From Tuflow
Revision as of 09:37, 20 August 2024 by Chris Huxley (talk | contribs) (Created page with "== TUFLOW SWMM Control File (TSCF) == The TUFLOW SWMM Control File (TSCF) is used as the file that references all EPA SWMM inputs. <ol> <li> In Windows File Explorer, navigate...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

TUFLOW SWMM Control File (TSCF)

The TUFLOW SWMM Control File (TSCF) is used as the file that references all EPA SWMM inputs.

  1. In Windows File Explorer, navigate to the TUFLOW\model folder and create a new blank text file with the extension .tscf (e.g. 1D2D_Urban_001.tscf).
  2. Open the TSCF into a Text Editor (Notepad++ is recommended) and add the following commands.
    Read SWMM == swmm\1D2D_Urban_HDR_001.inp  ! 1D SWMM Pipe Network input file
    Read SWMM == swmm\1D2D_Urban_RNF_001.inp  ! 1D SWMM Hydrology input file
    Read SWMM == swmm\swmm_inlet_curves_XP_001.inp  ! 1D SWMM Inlet Curves input file
    Read GIS SWMM Inlet Usage == swmm\swmm_iu_XP_001.gpkg >> inlet_usage  ! 1D SWMM Pipe Network Inlet Usage layer
  3. Save the TSCF.



Up
Go-up.png Continue to Next Step: "TUFLOW Boundary Control File (TBC)"
Up
Go-up.png Back to Main XPSWMM to TUFLOW Conversion Page