TUFLOW Message 2905

From Tuflow
Revision as of 14:32, 7 October 2024 by Emilie Nielsen (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

TUFLOW Message
WARNING 2905 - Code value specified is greater than 1, using 1.

Alternate Message
WARNING 2905 - Code value specified is less than -1, using -1.

Message Type
WARNING

Description
If a value specified in the 2d_code input later is greater than 1, TUFLOW will set the value to 1. If the value is less than -1, TUFLOW will set the value to -1. The valid options for cell code are:

  • Code -1, inactive cell but included in outputs (HPC and Classic only)
  • Code 0, inactive cell
  • Code 1, active cell

Suggestions
Review the attribute value of the 2d_code polygon.


Up
Go-up.png 2xxx Messages