TUFLOW Message 2811
Revision as of 11:21, 21 October 2024 by Emilie Nielsen (talk | contribs)
TUFLOW Message
ERROR 2811 - Unable to read model origin / extent from .tgc.
Alternate Message
NA
Message Type
ERROR
Description
An error occurred while reading the model origin / extent from the .tgc.
Suggestions
This error occurs when using Quadtree and the following command is used in the Quadtree Control File (.qcf): Model Origin and Extent == TGC. The issue occurs if the model origin and/or extent (i.e. grid size) are not correctly defined in the TGC. Ensure the following commands are in the TGC:
- Origin == , or Read GIS Location == , and
- Grid Size (X,Y) ==
Refer to the TUFLOW Manual for more information on TUFLOW commands.
Up |
---|
2xxx Messages |