TUFLOW Message 6009

TUFLOW Message
ERROR 6009 Improper SX Connection. Inlets must be connected at Junctions not Outfalls for SWMM node: <a>.

Alternate Message
ERROR 6009 Improper SX Connection. Non-inlet SX connections can only be assigned to outfalls and stand alone nodes. Change to HX connection, add inlet, or change to outfall node. SWMM node: <a>

Message Type
ERROR

Description
SX connections are only valid at outfall nodes or standalone nodes to convey subcatchment flows to a 2D domain.

Suggestions
Review the SX connection.

Up
6xxx Messages