TUFLOW CATCH Tutorial M02 TUFLOW FV GIS Inputs QGIS

From Tuflow
Jump to navigation Jump to search

Page Under Construction

Introduction

The ?this wording right? FV mesh and the FV 2d_mat layer are supplied and inspected. The downstream culvert is converted into TUFLOW FV format, using supplied files. Upstream and downstream boundaries are created to define the TUFLOW FV boundary.

Review Supplied TUFLOW FV Input Files

Navigate to the TUFLOW_CATCH_Module_02\Tutorial_Data folder.

  • Copy Stream_Mesh.2dm into the Modelling\TUFLOWFV\model\geo folder.
  • Copy TC02_culvert_dbase_001.csv into the Modelling\TUFLOWFV\model\csv folder.
  • Copy the following GIS layers into the Modelling\TUFLOWFV\model\gis folder:
  • 2d_ns_TC02_culverts_001_L
  • 2d_ns_TC02_weir_001_L
  • 2d_mat_TC02_FV_001_R

FV Mesh

A TUFLOW CATCH hydrology simulation requires a TUFLOW FV mesh. explain why the mesh is in the waterway

  1. Load the Stream_Mesh.2dm from the Modelling\TUFLOWFV\model\geo folder into QGIS.
  2. In the QGIS Layers panel, right click on Stream_Mesh and select 'Properties...'. Update the symbology to view the mesh rendering:
    • In 'Symbology', in the 'Contours' tab, set the color ramp to 'Blues'.
    • In the 'Rendering' tab, tick on 'Native Mesh Rendering'.
    • Click 'Apply', then 'OK'.
  3. Inspect the mesh. In particular, zoom into the eddies to view the ?triangulation?.

Create TUFLOW FV Boundaries


Up
Go-up.png Back to TUFLOW CATCH Tutorial 2
Retrieved from "https://wiki.tuflow.com/w/index.php?title=TUFLOW_CATCH_Tutorial_M02_TUFLOW_FV_GIS_Inputs_QGIS&oldid=42687"