TUFLOW Message 2937

From Tuflow
Revision as of 16:13, 26 May 2025 by Par (talk | contribs) (Created page with "{{TUFLOW_Message |tuflow_message=WARNING 2937 - "BED RESISTANCE DEPTH INTERPOLATION" only used for HQ curves in HPC solver.<br> |alt_msg=NA |type=WARNING<br> |message_desc...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

TUFLOW Message
WARNING 2937 - "BED RESISTANCE DEPTH INTERPOLATION" only used for HQ curves in HPC solver.

Alternate Message
NA

Message Type
WARNING

Description
Bed Resistance Depth Interpolation is not used in TUFLOW HPC (including Quadtree). When depth varying Manning's n values are used in HPC, interpolation between depths is linear. When using HQ curves that are calculated based on specified slope, the Bed Resistance Depth Interpolation setting is used.

Suggestions
Review whether command should be used in the model.


Up
Go-up.png 2xxx Messages
Retrieved from "https://wiki.tuflow.com/w/index.php?title=TUFLOW_Message_2937&oldid=43441"